| Engine description | John Deere PowerTech™ PVS |
| Engine displacement | 6.8 L 415 cu in. |
| Rated engine power | 180 hp 132 kW |
| Maximum engine power | 198 hp 146 kW |
| Rated PTO power (hp SAE) | 140 hp 104 kW |
| Maximum PTO power | At 1000 PTO rpm: 118 kW 158 hp |
| Transmission type | Standard: John Deere 20-speed PowrQuad Plus 40 km/h Optional: John Deere 16-speed PowrQuad Plus 30 km/h John Deere 20-speed AutoQuad Plus 40 km/h & 50 km/h John Deere 20-speed CommandQuad Plus 40 km/h AutoPowr™/IVT™ 40 km/h & 50 km/h |
| Hydraulic pump rated output | Standard: 45-cc pump: 114 L/min 30 gpm Optional: 60-cc pump: 155 L/min 41 gpm |
| Rear hitch category (SAE designation) | 3N/3 |
| Base machine weight | 8700 kg 19,180 lb |
| Description | John Deere PowerTech™ PVS |
| Engine type | 6068HL558 |
| Rated speed | 2100 rpm |
| Aspiration | Single variable geometry turbocharger |
| Emission level | Final Tier 4 |
| After treatment type | Diesel particle filter (DPF) with diesel oxidation catalyst (DOC) and selective catalytic reduction (SCR) using diesel exhaust fluid (DEF) |
| Displacement | 6.8 L 415 cu in. |
| Rated power | 180 hp 132 kW |
| Rated PTO power (hp SAE) | 140 hp 104 kW |
| Maximum PTO power | At 1000 PTO rpm: 118 kW 158 hp |
| Intelligent Power Management (IPM) | Transport and/or mobile PTO applications Additional engine power (hp ISO) at 2100 rpm: 14.9 kW 20 hp |
| Power boost | 10 percent |
| Maximum engine power | 198 hp 146 kW |
| Engine peak torque | 843 Nm |
| PTO torque rise | 40 percent |
| Type | Standard: John Deere 20-speed PowrQuad Plus 40 km/h Optional: John Deere 16-speed PowrQuad Plus 30 km/h John Deere 20-speed AutoQuad Plus 40 km/h & 50 km/h John Deere 20-speed CommandQuad Plus 40 km/h AutoPowr™/IVT™ 40 km/h & 50 km/h |
| Reverser | Electronic left-hand reverser |
| Creeper | Not available |
| Type | Standard/optional: Pressure-and-flow compensated (PFC) system with Load Sensing function |
| Pump rated output | Standard: 45-cc pump: 114 L/min 30 gpm Optional: 60-cc pump: 155 L/min 41 gpm |
| Number of rear selective control valves (SCVs) | Standard: Two ISO couplers Optional: Two to four ISO couplers |
| Number of mid selective control valves (SCVs) | Up to three |
| Joystick SCV control | Mechanical/electrical |
| Remote control valves available | Standard |
| Hitch category (SAE designation) | 3N/3 |
| Rear hitch lift capacity (SAE designation) | Standard: Category 3/3N: 4600 kg 10,132 lb Optional: Category 3/3N: 5151 kg 11,346 lb |
| Maximum lift capacity behind lift points | Standard: Category 3/3N: 8050 kg 17,731 lb Optional: Category 3/3N: 9050 kg 19,934 lb |
| Sensing type | Electronic at lower link |
| Rear axle differential lock | Electrohydraulically with oil-cooled clutch |
| Drawbar category | Category 3 |
| Maximum vertical load | 1800-3000 kg (3968-6614 lb) Maximum vertical load dependent on drawbar position |
| Type | Electrohydraulically operated, oil-cooled, multi-disc design |
| Engine rpm (at rated PTO speeds) | 540 PTO: 1960 rpm 1000 PTO: 1960 rpm |
| PTO actuation | In-cab switch and optional external fender-mounted remote control |
| Category | 3N |
| Electric power | Seven-pin electrical socket |
| Standard lift capacity | At hook ends: 3300 kg 7269 lb |
| Front power take-off (PTO) | Electrohydraulically engaged with oil-cooled, multi-disc design |
| PTO speed | 1000 PTO: 1969 rpm |
| Type | Standard: Rack-and-pinion rear axle - 92-mm (3.6 in.) shaft (2.550-m/100.4 in.) Optional: flange-type rear axle Rack-and-pinion rear axle - 100-mm (3.94 in.) shaft (2806-mm/110.5 in.) Rack-and-pinion rear axle - 100-mm (3.94 in.) shaft (2550-mm/100.4 in.) Rack-and-pinion rear axle - 100-mm (3.94 in.) shaft (3009-mm/118.5 in.) |
| Final drive type | Three planetary gear reduction |
| Rear differential lock | Electrohydraulically with oil-cooled clutch |
| Type | Standard: MFWD Optional: Triple-Link Suspension (TLS) MFWD axle (hydro-pneumatic, permanently active, triple link, self-leveling suspension with 100-mm [3.9-in.] suspension range) Triple-Link Suspension MFWD with brakes |
| Front axle differential lock | Standard: Self-locking differential Optional: hydrualic actuated |
| Front | 420/85R30 |
| Rear | 480/80R46 |
| Type | Dynamic load sensing, hydrostatic, flow metering |
| Alternator size | Standard: 14 V/125 amp Optional: 14 V/250 amp |
| Battery options | Standard: 12 V/154 amp-hr Optional: 12 V/174 amp-hr |
| Rollover protective structure, OOS | Gearshift location - console/floor Console |
| Seat | Standard: Standard seat with air suspension Optional: Economy seat with mechanical suspension |
| Cab suspension | Optional: Mechanical Cab Suspension (MCS) |
| Instructional seat | Optional |
| Display | Cornerpost display (right-hand A-post) Functionality: Performance monitor and individual settings |
| Radio | Standard: Standard AM/FM stereo |
| Inner cab volume | 3.0 m3 105.9 cu ft |
| dB(A) rating | 70 dBA |
| Cab glass area | 4.85 m2 |
| Wheelbase | 2800 mm 110.2 in. |
| Overall width | 2550 mm 100.3 in. (420/85R30 & 480/80R46) |
| Overall length | 4984 mm 196.2 in. (inc. weight bracket) |
| Overall height | 3060 mm 120.5 in. |
| Front axle center | 545 mm 21.4 in. (ground clearance) |
| Approximate shipping weight, Open;Cab | Cab: 8500 kg 18,739 lb |
| Base machine weight | Front axle 3480 kg 7672 lb Rear axle 5200 kg 11,508 lb 8700 kg 19,180 lb |
| Maximum permissible weight | 12,700 kg 27,999 lb |
| Crankcase oil volume | 23.5 L 6.2 U.S. gal. |
| Fuel tank | 325 L 85.9 U.S. gal. |
| Diesel exhaust fluid (DEF) tank | 20 L 5.3 U.S. gal. |
| Cooling system | 28 L 7.4 U.S. gal. |
| Transmission-hydraulic system | PowrQuad Plus/AutoQuad Plus/CommandQuad Plus: 71.0 L 18.8 U.S. gal. AutoPowr/IVT: 75.0 L 19.8 U.S. gal. |
| Interval for engine oil change | 500 hours |
| Interval for hydraulic/transmission oil change | 1500 hours |
| Interval for engine coolant change | 6000 hours |
| Loader | 660R |
| Lift capacity at full height | MSL: 2592 kg 5716 lb NSL: 2737 kg 6035 lb |
| Maximum lift height | MSL: 4.5 m 178.8 in. NSL: 4.5 m 177.3 in. |
| Guidance | Optional: AutoTrac™ with Universal Display |
| Telematic | Standard: JDLink™ |
| Remote diagnostics | Standard: JDLink™ |
| Country of manufacture | Germany |
| Date collected | 25-Jun-24 |
