6105E Utility Tractor

6105E

6105E Utility Tractor

Description

The 6105E offers an easy-to-use, value-spec utility tractor that was built to deliver versatility, fluid economy and a low-cost of operation to no-nonsense operations.

Main Features

  • Engine HP: 106 Max | 105 Rated
  • John Deere FT4 PowerTech™ engine combines performance and fluid economy
  • 12/12 or 24/12 hi-lo PowrReverser™ transmission
  • Cab, open station, 2WD or MFWD
  • 15 degrees of seat swivel with optional air-ride seat

Specifications

Engine description John Deere PowerTech™ PWL (B20 Diesel Compatible)
Engine displacement 4.5 L
275 cu in.
Rated engine power 97/68EC: 77 kW
105 engine hp
Rated PTO power (hp SAE) 66 kW
89 PTO hp
Transmission type Standard: John Deere 12F/12R PowrReverser™ Transmission: 30 km/h
19 mph
Optional: John Deere 24F/12R PowrReverser Transmission: 40 km/h
25 mph
Hydraulic pump rated output 36.5 cc pump: 75.7 L/min
20 gpm
Rear hitch category (SAE designation) Category 2: 2500 kg (5500 lb) standard lift at 610 mm behind hitchpoint
Optional: Category 2: 3318 kg (7300 lb) heavy duty lift at 610 mm behind hitchpoint
Description John Deere PowerTech™ PWL (B20 Diesel Compatible)
Engine type Diesel, in-line, 4-cylinders, wet-sleever cylinder lingers with 4 valves-in-head
Engine family HJDXL04.5315
Rated speed 2200 rpm
Aspiration Turbocharged, wastegate turbocharger with air-to-air aftercooling and cooled exhaust gas recirculation
Emission level Final Tier 4
After treatment type DOC/DPF/SCR
Displacement 4.5 L
275 cu in.
Rated power 97/68EC: 77 kW
105 engine hp
Rated PTO power (hp SAE) 66 kW
89 PTO hp
Engine peak torque At 1,600 rpm: 432 Nm
318 lb-ft
PTO torque rise 30 percent
Type Standard: John Deere 12F/12R PowrReverser™ Transmission: 30 km/h
19 mph
Optional: John Deere 24F/12R PowrReverser Transmission: 40 km/h
25 mph
Type Open-center
Gear driven
Pump rated output 36.5 cc pump: 75.7 L/min
20 gpm
Available flow at a single rear SCV 75.7 L/min
20 gpm
Number of rear selective control valves (SCVs) Standard: ISO Couplers: 2
Optional: ISO Couplers 3
SCV control Mechanical
Hitch category (SAE designation) Category 2: 2500 kg (5500 lb) standard lift at 610 mm behind hitchpoint
Optional: Category 2: 3318 kg (7300 lb) heavy duty lift at 610 mm behind hitchpoint
Maximum lift capacity behind lift points Standard: Category 2 with heavy duty lift: 3318 kg
7300 lb
Sensing type Optional
Drawbar category Standard: Category 2
Optional: Category 2 heavy duty
Maximum vertical load Standard: Category 2 1000-1250 kg
2205-2756 lb
Optional: Category 2 heavy duty: 1200-1900 kg
2645-4189 lb
Maximum vertical load dependent on drawbar position
Type Independent
Standard: 35 mm (1.375 in.) 540 rpm/1000 rpm reversible shaft
Engine rpm (at rated PTO speeds) 2085 engine rpm at 540 rpm PTO
2067 engine rpm at 1000 rpm PTO
Type Flange
Final drive type Inboard Planetary
Rear differential lock Full-locking mechanical
Type Standard: MFWD
Optional: 2WD
Front axle differential lock 2WD: None
MFWD: limited slip
Wheel tread range 2WD: 1533-2043 mm
60.4-80.4 in.
MFWD: 1516-2016 mm
59.7-79.4 in.
Type Standard: Hydrostatic power
Alternator size 90 amp
Battery options 12 V
Total cold cranking amps 925 CCA
Seat Standard: Mechanical suspension cloth seat
Optional: Air suspension
Instructional seat Optional
Display LCD instrument cluster
Wheelbase 2WD: 2456 mm
96.7 in.
MFWD: 2450 mm
96.5 in.
Approximate shipping weight, Open;Cab 2WD: Open: 4064 kg
8960 lb
MFWD: Open: 4268 kg
9410 lb
Cab: 4645 kg
10,240 lb
Maximum ballast level 6464 kg
14250 lb
Crankcase oil volume 15 L
4 U.S. gal.
Fuel tank 168 L
44.4 U.S. gal.
Cooling system Open station: 18.6 L
4.7 U.S. gal.
Cab: 19.1 L
5 U.S. gal.
Transmission-hydraulic system 58 L
15.3 U.S. gal.
Interval for engine oil change 500 hours
Interval for hydraulic/transmission oil change 1,000 hours
Interval for engine coolant change 5,000 hours
Country of manufacture Mexico
Date collected 9-Feb-17

You are in good hands!

Agritex offers exceptional support. Learn more by visiting our different pages or contact us!