RDF45 HydraFlex™ Draper

RDF45

RDF45 HydraFlex™ Draper

Description

The new RDF45 HydraFlex Draper is available for the S7 800 and S7 900 Combines offering an added five feet of productivity for up to 10% more acres harvested in a day.

Main Features

  • Harvest crops as close as possible to the ground with the HydraFlex™ cutterbar
  • Minimize grain loss with a two-speed center feed section
  • Enable higher harvesting speed without sacrificing cut quality with a 4” (10.2 cm) double cut, dual drive, shaft driven cutterbar
  • Get more done by eliminating header calibrations
Contact us

Specifications

Key Specs
Cutterbar length 13.72 m
45 ft
Knife drive Double-cut, dual-drive, shaft-driven cutterbar: 10.2 cm
4 in.
Knife speed X Series Combine: 520 cycles/min
S-Series Combine: 490 cycles/min
Pickup reel operating speeds 6-70 rpm
Draper belts speed control Hydraulic from cab (side belts only)
Platform
Type Rigid frame flexible cutterbar
Cutterbar
Type Straight-line knife drive system
Cutterbar vertical flex: 190 mm
7.5 in.
Length 13.72 m
45 ft
Knife drive Double-cut, dual-drive, shaft-driven cutterbar: 10.2 cm
4 in.
Knife speed X Series Combine: 520 cycles/min
S-Series Combine: 490 cycles/min
Base skid shoe height 3.8 cm
1.5 in.
Pickup reel
General Two-piece, poly tine pickup reel with 8-in. (20-cm) tube
Number of slats Six bat poly
Fingers Nylon
Diameter 106.7 cm
42 in.
Height control Hydraulic
Speed control Hydraulic
Reel lift 72 cm
28.3 in.
Reel fore and aft 35.9 cm
14.1 in.
Fore of the cutterbar 40.6 cm
16 in.
Reel resume Base
Reel reverse Base
Operating speeds 6-70 rpm
Draper belts
Width Side belts: 101.6 cm
40 in.
Center belts: 177.6 cm
70 in.
Belt depth 101.2 cm
39.8 in.
Cleat height 19.05 mm
0.75 in.
Operating speed Side belts (variable): 1-3.5 m/s
3.3-11.5 fps
Center belts: 211 m/min
692 fpm
Low-speed center belt (fixed): 4.2 m/s
13.8 fps
High-speed center belt (fixed): 5.1 m/s
16.7 fps
Speed control Hydraulic from cab (side belts only)
Center belt reverse Base
Feed drum
Diameter 414 mm
16.3 in.
Feed drum fingers Heavy-duty and round with breakaway notch and retainer
Diameter: 16 mm
0.625 in.
Number of fingers 21
Auger finger platform Triple chevron, retracting
Finger reach 152 mm
6 in.
Drum/auger reverse Base
Operating speed Low speed: 200 rpm
High speed: 240 rpm
Center cleanout door Base
Header height sensing
Type Electrohydraulic
Header height sensing on the ground Base
Header height sensing off the ground Optional: four sensors
Top auger
Type Optional: hydraulic drive
Size 45.7 cm
18 in.
Dimensions
Platform length 14.6 m
47.9 ft
Overall operating depth With dividers: 2.74 m
9 ft
Transport width, field position 14.6 m
47.9 ft
Weight
Approximate weight 4437 kg
9782 lb
Additional information
Date collected 15 June 2020

Similar products

BP15 BP15 Belt Pickup Platform
RDF30 RDF30 HydraFlex™ Draper
RDF35 RDF35 HydraFlex™ Draper
RDF40 RDF40 HydraFlex™ Draper
HDR35 HDR35 Hinged Frame, Rigid Cutterbar Draper
HDR40 HDR40 Hinged Frame, Rigid Cutterbar Draper
HDR45 HDR45 Hinged Frame, Rigid Cutterbar Draper
HDR50 HDR50 Hinged Frame, Rigid Cutterbar Draper
HDF35 HDF35 Hinged Frame, Flexible Cutterbar Draper
HDF40 HDF40 Hinged Frame, Flexible Cutterbar Draper
HDF45 HDF45 Hinged Frame, Flexible Cutterbar Draper
HDF50 HDF50 Hinged Frame, Flexible Cutterbar Draper

You are in good hands!

Agritex offers exceptional support. Learn more by visiting our different pages or contact us!

Parts Service Repair and Maintenance Service