HDF50 Hinged Frame, Flexible Cutterbar Draper

HDF50

HDF50 Hinged Frame, Flexible Cutterbar Draper

Description

Learn more about the features, specifications, and more for the HDF50 Flexible Cutterbar Draper Platform.

Main Features

  • Capture more crop in rolling and uneven terrain with a total wing range of 45-inches (114.3 cm)
  • Experience the best of both worlds with a flexible cutterbar on a hinged draper
  • Maintain reel to cutter bar gap in all crops – even terraces and rolling terrains – with 3-piece reel and cam reel
  • Reduce cutterbar loss with Grain Saver Draper Belts
Contact us

Specifications

Key Specs
Cutterbar length 15.3 m
50.1 ft
Knife drive Double-cut, dual-drive, shaft-driven cutterbar: 10.2 cm
4 in.
Knife speed X Series Combine: 520 cycles/min
S-Series Combine: 490 cycles/min
Pickup reel operating speeds 8-70 rpm
Draper belts speed control Hydraulic from cab (side belts only)
Platform
Type Hinged frame flexible cutterbar
Cutterbar
Type Straight-line knife drive system
Length 15.3 m
50.1 ft
Knife drive Double-cut, dual-drive, shaft-driven cutterbar: 10.2 cm
4 in.
Knife speed X Series Combine: 520 cycles/min
S-Series Combine: 490 cycles/min
Base skid shoe height 3.8 cm
1.5 in.
Pickup reel
Number of slats Six bat poly
Fingers Nylon
Diameter 106.7 cm
42 in.
Height control Hydraulic
Speed control Hydraulic
Reel lift Off the cutterbar: 100.6 cm
39.6 in.
Reel fore and aft Fore of the cutterbar: 26.4 cm
10.4 in.
Reel resume Base
Reel reverse Base
Operating speeds 8-70 rpm
Draper belts
Width Side belts: 6.7 m
21.9 ft
Center belts: 200 cm
79 in.
Belt depth 100 cm
39.8 in.
Cleat height 19 mm
0.75 in.
Speed control Hydraulic from cab (side belts only)
Center belt reverse Base
Feed drum
Diameter 40.6 cm
16 in.
Feed drum fingers Heavy-duty and round with breakaway notch and retainer
Diameter: 16 mm
0.625 in.
Number of fingers 18
Auger finger platform Triple chevron, retracting
Finger reach 152 mm
6 in.
Drum/auger reverse Base
Operating speed Low speed: 200 rpm
High speed: 240 rpm
Center cleanout door Base
Header height sensing
Type Electrohydraulic
Header height sensing on the ground Base
Header height sensing off the ground Base
Top auger
Type Optional: hydraulic drive
250-350 rpm
Fingered augers Optional
Size Diameter: 43.2 cm
17 in.
Dimensions
Platform length 16.1 m
52.9 ft
Overall operating depth With dividers: 3.2 m
10.6 ft
Additional information
Date collected 24 Mar 2021

Similar products

BP15 BP15 Belt Pickup Platform
RDF30 RDF30 HydraFlex™ Draper
RDF35 RDF35 HydraFlex™ Draper
RDF40 RDF40 HydraFlex™ Draper
RDF45 RDF45 HydraFlex™ Draper
HDR35 HDR35 Hinged Frame, Rigid Cutterbar Draper
HDR40 HDR40 Hinged Frame, Rigid Cutterbar Draper
HDR45 HDR45 Hinged Frame, Rigid Cutterbar Draper
HDR50 HDR50 Hinged Frame, Rigid Cutterbar Draper
HDF35 HDF35 Hinged Frame, Flexible Cutterbar Draper
HDF40 HDF40 Hinged Frame, Flexible Cutterbar Draper
HDF45 HDF45 Hinged Frame, Flexible Cutterbar Draper

You are in good hands!

Agritex offers exceptional support. Learn more by visiting our different pages or contact us!

Parts Service Repair and Maintenance Service