RDF30 HydraFlex™ Draper

RDF30

RDF30 HydraFlex™ Draper

Description

The new RDF30 HydraFlex™ Draper offers a 30-foot (9.1 m) width that allows you to stretch your productivity to new heights, particularly in rice or soybeans.

Main Features

  • Harvest crops as close as possible to the ground with the HydraFlex™ cutterbar
  • Minimize grain loss with a two-speed center feed section
  • Enable higher harvesting speed without sacrificing cut quality with a 4” (10.2 cm) double cut, dual drive, shaft driven cutterbar
  • Get more done by eliminating header calibrations
Contact us

Specifications

Key Specs
Cutterbar length 9.14 m
30 ft
Knife drive Double-cut, dual-drive, shaft-driven cutterbar: 10.2 cm
4 in.
Knife speed X Series Combine: 520 cycles/min
S-Series Combine: 490 cycles/min
Pickup reel operating speeds 6-70 rpm
Draper belts speed control Hydraulic from cab (side belts only)
Platform
Type Rigid frame flexible cutterbar
Cutterbar
Type Straight-line knife drive system
Cutterbar vertical flex: 190 mm
7.5 in.
Length 9.14 m
30 ft
Knife drive Double-cut, dual-drive, shaft-driven cutterbar: 10.2 cm
4 in.
Knife speed X Series Combine: 520 cycles/min
S-Series Combine: 490 cycles/min
Base skid shoe height 3.8 cm
1.5 in.
Pickup reel
General One-piece, poly tine pickup reel with 10-in. (25-cm) tube
Number of slats Base: six bat poly
Optional: steel tine
Fingers Base: nylon
Optional: steel
Diameter 106.7 cm
42 in.
Height control Hydraulic
Speed control Hydraulic
Reel lift 72 cm
28.3 in.
Reel fore and aft 35.9 cm
14.1 in.
Fore of the cutterbar 40.6 cm
16 in.
Reel resume Base
Reel reverse Base
Operating speeds 6-70 rpm
Draper belts
Width Cross belt: 101.6 cm
40 in.
Center belts: 177.8 cm
70 in.
Belt depth 101.2 cm
39.8 in.
Cleat height Cross belt cleat height: 19.05 mm
0.75 in.
Operating speed Side belts (variable): 1-3.5 m/s
3.3-11.5 fps
Center belts: 211 m/min
692 fpm
Low-speed center belt (fixed): 4.2 m/s
13.8 fps
High-speed center belt (fixed): 5.1 m/s
16.7 fps
Speed control Hydraulic from cab (side belts only)
Center belt reverse Base
Feed drum
Diameter 414 mm
16.3 in.
Feed drum fingers Heavy-duty and round with breakaway notch and retainer
Diameter: 16 mm
0.625 in.
Number of fingers 21
Auger finger platform Triple chevron, retracting
Finger reach 152 mm
6 in.
Drum/auger reverse Base
Operating speed Low speed: 200 rpm
High speed: 240 rpm
Center cleanout door Base
Header height sensing
Type Electrohydraulic
Header height sensing on the ground Base
Header height sensing off the ground Optional: three sensors
Top auger
Type Optional: hydraulic drive
Size 45.7 cm
18 in.
Dimensions
Platform length 10.07 m
33 ft
Overall operating depth With dividers: 2.74 m
9 ft
Transport width, field position 10.07 m
33 ft
Weight
Approximate weight 3447 kg
7600 lb
Additional information
Date collected 15 June 2020

Similar products

BP15 BP15 Belt Pickup Platform
RDF35 RDF35 HydraFlex™ Draper
RDF40 RDF40 HydraFlex™ Draper
RDF45 RDF45 HydraFlex™ Draper
HDR35 HDR35 Hinged Frame, Rigid Cutterbar Draper
HDR40 HDR40 Hinged Frame, Rigid Cutterbar Draper
HDR45 HDR45 Hinged Frame, Rigid Cutterbar Draper
HDR50 HDR50 Hinged Frame, Rigid Cutterbar Draper
HDF35 HDF35 Hinged Frame, Flexible Cutterbar Draper
HDF40 HDF40 Hinged Frame, Flexible Cutterbar Draper
HDF45 HDF45 Hinged Frame, Flexible Cutterbar Draper
HDF50 HDF50 Hinged Frame, Flexible Cutterbar Draper

You are in good hands!

Agritex offers exceptional support. Learn more by visiting our different pages or contact us!

Parts Service Repair and Maintenance Service