| Engine power (gross) | SAE J1995 rated power: 25.5 kW 34.2 hp 34.7 PS at 2800 rpm |
| Power take-off (PTO) power | 22.7 kW 30.4 hp |
| Steering hydraulics | 16.8 L/min 4.4 gpm |
| Implement hydraulics | 22.4 L/min 5.9 gpm |
| Hitch type | Category 1 |
| Lift capacity, 24-in. behind link arms | 944 kg 2081.2 lb |
| Standard transmission; forward/reverse | 8F/8R synchromesh shuttle shift gear transmission |
| Cruise control | No |
| Approximate shipping weight (open-station; cab) | Open operator station (OOS): 1275 kg 2811 lb Cab: Not applicable |
| Wheelbase | 1574 mm 62 in. |
| Manufacturer | Yanmar® |
| Engine model | 3TNV88C-KJPT |
| Engine power (gross) | SAE J1995 rated power: 25.5 kW 34.2 hp 34.7 PS at 2800 rpm |
| Power take-off (PTO) power | 22.7 kW 30.4 hp |
| Rated engine speed | 2800 rpm |
| Injection pump type | High pressure common rail direct injection |
| Aspiration | Natural |
| Emissions compliance | Final Tier 4 |
| Cylinders/displacement | 3 / 1.64 L 3 / 100.2 cu in. |
| Number of cylinders | Three |
| Cylinder liners | Cast-in-block |
| Bore and stroke | 88 x 90 mm 3.46 x 3.54 in. |
| Compression ratio | 19.1:1 |
| Lubrication | Pressurized |
| Cooling system | Liquid |
| Air cleaner | Dual element |
| Engine torque at rated speed | 87 Nm 64.2 lb-ft |
| Fuel tank capacity | 36.7 L 9.7 U.S. gal. |
| Battery size | 600 CCA |
| Alternator (12-V) | 55 amp |
| Starter size | 1.4 kW 1.9 hp |
| Type | High pressure common rail direct injection |
| Standard transmission; forward/reverse | 8F/8R synchromesh shuttle shift gear transmission |
| Left-hand reverser | Yes |
| Transmission gear ranges | Four gears and two ranges |
| Final drive | Spur gear |
| Brakes | Wet disk |
| Steering | Power steering |
| Axle capacity | Front 880 kg 1940 lb Rear 1600 kg 3527 lb |
| Creeper | No |
| Cruise control | No |
| Differential lock | Yes |
| Type | Open center |
| Pump rated output | Steering 16.8 L/min 4.4 gpm Implement 22.4 L/min 5.9 gpm 39.2 L/min 10.3 gpm |
| Pump type | Single gear |
| Maximum operating pressure | 172 bar 2495 psi |
| Draft control sensing | Position control |
| Remote control valves available | Up to two (optional) |
| Type | Category 1 |
| Lift capacity, 24-in. behind link arms | 944 kg 2081.2 lb |
| Standard | At 2400 rpm: 540 rpm |
| Control | Mechanical |
| Clutch | Transmission |
| Brake (for mid and rear PTO) | Wet disk |
| Crankcase with filter | 4.5 L 4.8 gal. |
| Transmission and hydraulic system | 33 L 34.8 qt |
| Type | Spur gear |
| Rollover protective structure | Type Foldable ASABE S478 |
| Platform - flat/straddle | Straddle |
| Gear shift location - console/floor | Right-hand side |
| Wheelbase | 1574 mm 62 in. |
| Front axle clearance | Minimum: 331 mm 13 in. Maximum: 353 mm 13.9 in. |
| Turning radius with brakes | 1.63 m 5.3 ft |
| Approximate shipping weight (open-station; cab) | OOS: 1275 kg 2811 lb Cab: Not applicable |
| Front | R1 Bar: 7-14 R3 Turf: 27x8.5-15 R4 Industrial: 25x8.5-14 |
| Rear | R1 Bar: 11.2-24 R3 Turf: 41x14-20 R4 Industrial: 15-19.5 |
| Toolbox | Yes |
| Tilt steering wheel | No |
| 12-V Outlet | No |
