3046R Compact Tractor

Description

The John Deere 3046R is the most powerful compact tractor in the 3 Series, with 46 hp and increased loader capacity. Round bale handling, light earthmoving and commercial snow removal — utility-class power in a footprint that still fits where you need it. Available at Agritex dealerships.

Main Features

Powerful and reliable Yanmar Diesel Engine
AutoConnect™ deck compatible for deck attach/detach in seconds
Cab or Open Station configuration available
Standard hydrostatic transmission with Twin Touch™ pedals

Specifications

Key Specs

Engine power (gross)	SAE J1995 rated power: 33.3 kW 44.7 hp 45.3 PS at 2600 rpm
Power take-off (PTO) power	25.2 kW 33.9 hp
Steering hydraulics	23.5 L/min 6.2 gpm
Implement hydraulics	34.3 L/min 9.1 gpm
Hitch type	Category 1
Lift capacity, 24-in. behind link arms	995 kg 2194 lb
Standard transmission; forward/reverse	eHydro transmission
Cruise control	Standard
Approximate shipping weight (open-station; cab)	Open operator station (OOS): 1391 kg 3066 lb Cab: 1818 kg 4008 lb
Wheelbase	1727 mm 68 in.

Engine

Manufacturer	Yanmar®
Engine model	3TNV86CHT-MJTV
Engine power (gross)	SAE J1995 rated power: 33.3 kW 44.7 hp 45.3 PS at 2600 rpm
Power take-off (PTO) power	25.2 kW 33.9 hp
Rated engine speed	2600 rpm
Type	Diesel
Injection pump type	High pressure common rail direct injection
Aspiration	Turbocharged and intercooled
Emissions compliance	Final Tier 4
Cylinders/displacement	Three cylinders: 1.57 L 95.7 cu in.
Number of cylinders	Three
Cylinder liners	Cast-in-block
Bore and stroke	86 x 90 mm 3.4 x 3.54 in.
Compression ratio	19.1:1
Lubrication	Pressurized
Cooling system	Liquid
Air cleaner	Dual element
Engine torque at rated speed	112.3 Nm 90 lb-ft
Fuel tank capacity	OOS: 37.4 L 10 U.S. gal. Cab only: 47.6 L 12.6 U.S. gal.

Electrical

Battery size	500 CCA
Alternator (12-V)	75 amp
Starter size	1.4 kW 1.9 hp

Fuel system

Type	High pressure common rail direct injection

Transmission

Standard transmission; forward/reverse	eHydro transmission
Transmission gear ranges	Three-range, infinitely variable
Final drive	Spur gear
Brakes	Wet disk
Steering	Hydrostatic power steering
Axle capacity	Front 1450 kg 3197 lb Rear 1850 kg 4079 lb
Cruise control	Standard

Hydraulics

Type	Open center
Pump rated output	Steering 23.5 L/min 6.2 gpm Implement 34.3 L/min 9.1 gpm 57.8 L/min 15.3 gpm
Pump type	Single gear
Maximum operating pressure	172 bar 2495 psi
Draft control sensing	Position control
Remote control valves available	Up to six rear remotes

3-point hitch

Type	Category 1
Lift capacity, 24-in. behind link arms	995 kg 2194 lb

Power take-off (PTO)

Standard	Independent rear: 540 rpm
Optional	Mid: 2100 rpm
Control	Lever and switch
Clutch	Wet disk
Brake (for mid and rear PTO)	Wet disk

Fluid capacities

Crankcase with filter	5.7 L 6 gal.
Transmission and hydraulic system	26.5 L 7 U.S. gal.

Final drive

Type

Spur gear

Operator station

Rollover protective structure	Type Foldable
Platform - flat/straddle	One-piece semi flat

Cab

Compliance	Complies with OSHA, SAE, and CSA standards for rollover protection
Visibility	360 degree (angle)
Doors	Two
Noise rating	80 dBA
Seat equipment	Scissor-link

Dimensions

Wheelbase	1727 mm 68 in.
Front axle clearance	Minimum: 171 mm 6.7 in. Maximum: 299 mm 11.8 in.
Turning radius with brakes	2.7 m 8.8 ft
Turning radius without brakes	2.8 m 9.2 ft
Approximate shipping weight (open-station; cab)	OOS: 1391 kg 3066 lb Cab: 1818 kg 4008 lb

Tires

Front	R1 Bar: 7-14 R3 Turf : 27x8.50-15 R3 Turf Special: 25/10.5LLx15 R4 Industrial: 25x8.5-14 or 27x8.5-15
Rear	R1 Bar: 11.2-24 R3 Turf: 41x14-20 R3 Turf Special: 41x18LL-16.1 R4 Industrial: 15-19.5 or 43x16-20
Front tread range	1117 mm 44 in.
Rear tread spacing	1031 mm 40.6 in.