| Blade spacing | 18.4 cm 7.25 in. |
| Horsepower requirement | 24.5-34.25 engine kW/m (10-14 engine hp/ft) |
| Transport width | Three-section: 3.76 m (12 ft, 4 in), 3.76 m (12 ft, 4 in.), 4.27 m (14 ft), and 5.3 m (17 ft, 5 in.) Five-section: 4.65 m (15 ft, 3 in.) and 4.65 m (15 ft, 3 in.) |
| Transport height | Three-section: 3.35 m (11 ft), 3.96 m (13 ft), 4.27 m (14 ft), and 4.19 m (13 ft, 9 in.) Five-section: 3.9 m (12 ft, 10 in.) and 4.34 m (14 ft, 3 in.) |
| Operating speed | 12.9-16.1 km/h 8-10 mph Up to 12.9 km/h (8 mph) in rocky conditions |
| Blade spacing | 18.4 cm 7.25 in. |
| Gang angle | 0-12 degrees |
| Weight per blade | 117.9 kg 260 lb |
| Blade diameter | 55.9 cm 22 in. |
| Blade thickness | 6.5 mm 0.256 in. |
| Rolling basket | Double Rolling basket, Reverse Knife edge, followed by round bar or flat bar rolling basket |
| Horsepower requirement | 24.5-34.25 engine kW/m (10-14 engine hp/ft) |
| Transport width | Three-section: 3.76 m (12 ft, 4 in), 3.76 m (12 ft, 4 in.), 4.27 m (14 ft), and 5.3 m (17 ft, 5 in.) Five-section: 4.65 m (15 ft, 3 in.) and 4.65 m (15 ft, 3 in.) |
| Transport height | Three-section: 3.35 m (11 ft), 3.96 m (13 ft), 4.27 m (14 ft), and 4.19 m (13 ft, 9 in.) Five-section: 3.9 m (12 ft, 10 in.) and 4.34 m (14 ft, 3 in.) |
| Underframe clearance | 3.66 m 12 ft |
| Transport length | Without rear hitch Three-section: 10.06 m 33 ft Five-section: 12.19 m 40 ft |
| Working width | Gang angle at 0 degrees Three-section: 6.25 m (20 ft, 6 in.), 7.75 m (25 ft, 5 in.), 9.2 m (30 ft, 3 in.), and 10.3 m (33 ft, 10 in.) Five-section: 13.26 m (43 ft, 6 in.) and 15.1 m (49 ft, 6 in.) |
| Depth control | Single point and TruSet™ system |
| Maximum operating depth | 10.16 cm 4 in. *Maximum depth may be shallower depending on ground conditions and tire package. |
| Operating speed | 12.9-16.1 km/h 8-10 mph |
