| Engine power | 21.5 hp 16.0 kW |
| Oil change | No-tools oil drain with replaceable filter |
| Engine manufacturer/model | FR651V |
| Transaxle type | K57 hydrostatic integrated with transaxle |
| Transaxle control | Twin Touch™ pedals |
| Rear tires | 20x10-8 |
| Lift system type | Hydraulic |
| Cutting width | Accel Deep™ mower deck, 42 in. 107 cm |
| U.S. warranty | 4 year/300 hour bumper-to-bumper* (*Term limited to years or hours used, whichever comes first, and varies by model. See the LIMITED WARRANTY FOR NEW JOHN DEERE TURF AND UTILITY EQUIPMENT at JohnDeere.com or JohnDeere.ca/TUWarranty for details.) |
| Power | 21.5 hp 16.0 kW |
| Displacement | 44.3 cu in. 726 cc |
| Manufacturer/model | FR651V |
| Type | Overhead valve, full-pressure lube, oil filter |
| Cylinders | V-twin, cast-iron liners |
| Governor | Mechanical |
| Choke/speed control | Separate levers, automatic choke return |
| Cooling method | Air |
| Air cleaner | Dry, replaceable |
| Oil change | No-tools oil drain with replaceable filter |
| Type | Gasoline |
| Fuel delivery | Pulse pump, carburetor |
| Fuel gauge | Gauge on dash |
| Fuel tank location | Rear |
| Fuel fill opening | On left fender, 3 in. 7.6 cm |
| Fuel tank capacity | 3.3 U.S. gal. 12.5 L |
| Battery | 12 V 340 CCA |
| Charging system | Flywheel alternator, regulated, 12 amp |
| Engine starter | Bendix |
| Hour meter | Yes |
| Headlights | Two standard, incandescent, 27 W |
| Taillights or reflector | No |
| Backup lights | No |
| Rear work lights | No |
| 12-V outlet | Optional |
| Type | K57 hydrostatic integrated with transaxle |
| Control | Twin Touch™ pedals |
| Cruise control | Yes, button on dash |
| Oil cooler | Fins and fan on transaxle |
| Oil filter | Internal, replaceable |
| Differential lock | No |
| Forward speed | 0-5.8 mph 0-9.3 km/h |
| Reverse speed | 0-3.5 mph 0-5.6 km/h |
| Brakes | Internal wet disc |
| Frame | Welded heavy-duty |
| Primer/paint | E-coat/powder |
| Weight bracket | Standard rear, optional front |
| Receiver hitch | No |
| Front axle | Cast iron front axle, front wheel ball bearings |
| Spindle bushings | Metal, replaceable |
| Front tires | 15x6-6 |
| Rear tires | 20x10-8 |
| Hood material | Fully enclosed, molded-in color material reduces sound, will not rust or dent |
| Fender deck material | Stamped steel |
| Floor mats | Sure-grip rubber |
| Storage | Yes, under seat and covered toolbox |
| Service interval decal | Yes |
| Fender handles/grips | No |
| Cup holder | Yes |
| Equipment mounting | Yes, heavy duty |
| Maximum towing capacity | 600 lb 272 kg |
| Type | Power, hydraulic |
| Four-wheel steer | Not available on this model |
| Steering wheel | Large, 14 in. 35.6 cm |
| Tilt steering wheel | No |
| Turning radius | 22 in. 55.9 cm |
| Uncut circle radius | 30 in. 76 cm |
| Type | Cut-and-sewn high-back |
| Seat back height | 18 in. 46 cm |
| Armrests | Optional |
| Fore-aft adjustment | While seated, ball bearing slide rail, 15-position, 6.6 in. 17 cm |
| Seat suspension | Tilt, two coil springs, three-position no-tools adjustment for operator weight |
| Type | Hydraulic |
| Hydraulic outlets | No |
| Mower cut height | 13 positions, 1-4 in. 2.5-10.2 cm |
| Cut height increments | 0.25 in. 0.64 cm |
| Preset cut height | Yes |
| Type | Side discharge |
| Cutting width | Accel Deep™ mower deck, 42 in. 107 cm |
| Construction | Stamped steel deck shell |
| Mower deck material | 12 gauge 0.105 in. 2.7 mm |
| Mower wash port | Yes |
| Mower drive system | Electric power take-off (PTO) clutch, in-line belt |
| Mower wheels | Two |
| Mower wheel adjustment | Four-position, tool required |
| Mower level adjustment | Exact Adjust ports and onboard deck-leveling gauge |
| Type | Slide under tractor |
| Front draft arms | Attached with spring pins at two points |
| Rear draft arms | Two pins and spring clips |
| Mower wheels rotate | No |
| Drive system | Single belt |
| Meets ANSI standard | Yes |
| Meets OPEI standard | Yes |
| Backup protection | Reverse Implement Option (RIO) |
| Safety video | Yes |
| Notes | Fully enclosed, molded-in color material reduces sound, will not rust or dent Power steering for exceptional maneuverability and comfort One-piece hood for easy service access, molded-in color hood material reduces sound and will not rust or dent Durable E-coat primer and powder-paint finish |
| Warranty | 4 year/300 hour bumper-to-bumper* (*Term limited to years or hours used, whichever comes first, and varies by model. See the LIMITED WARRANTY FOR NEW JOHN DEERE TURF AND UTILITY EQUIPMENT at JohnDeere.com or JohnDeere.ca/TUWarranty for details.) |
| Mowers | 42A (standard) |
| Rear bagger | 2-bag, 7 bu 247 L |
| Mulching system | Yes, MulchControl™ |
| Front thatcher | 38, 46, 54 in. 96.5, 116.8, 137.2 cm |
| Front blade | 44 in. 111.8 cm |
| Snow blower | Two-stage, 44 in. 111.8 cm |
| Sprayer | Tow-behind, 15 U.S. gal. 56.8 L Tow-behind, 25 U.S. gal. 94.6 L Mounted, 25 U.S. gal. |
| Spreader | Tow-behind, 125 lb 57.7 kg Tow-behind, 175 lb 79.4 kg Mounted, 125 lb |
| Front bumper | Styled bumper option |
| Brush guard | Yes |
| Weather protection | Weather enclosure |
| Sun canopy | Yes |
| Bucket holder | Yes, double bucket |
| Grass striping | Lawn striping kit |
| Tractor shovel | 40 in. 101.6 cm |
| Tow-behind tools | 16 |
| Height | 49 in. 1244 mm |
| Overall length | 71.5 in. 1817 mm |
| Wheelbase | 49.4 in. 1255 mm |
| Width with mower | 50.5 in. 1283 mm |
| Width with mower (deflector raised for storage) | 51.2 in. 1300 mm |
| Width without mower | 38 in. 964 mm |
| Weight | Mower, no fuel: 570 lb 259 kg |
| Manufacturing location | Horicon, Wisconsin, USA |
| Date collected | 3-Oct-22 |
