| Overall width | 9.6 m 31.7 ft |
| Cutterbar length | 9.14 m 30 ft |
| Flex cutterbar float range | 152 mm 6 in. |
| Tilt adjustment | Located on feederhouse: 17 degree (angle) |
| Height control | Hydraulic |
| Speed control | Hydraulic |
| Type | Auger |
| Type | Knife system with in-line gearbox: 102 mm 4 in. |
| Cutterbar angle | 10 degree (angle) |
| Cutterbar length | 9.14 m 30 ft |
| Flex cutterbar float range | 152 mm 6 in. |
| Tilt adjustment | Located on feederhouse: 17 degree (angle) |
| Knife sections | Heavy-duty, over-serrated |
| Guards | Forged steel, heat-treated |
| Backshaft speed | 490 rpm |
| Knife speed | 520 cycles/min |
| Diameter | 66 cm 26 in. |
| Operating speed | Slow down: 135, 152 rpm Speed up: 170 rpm |
| Number for slats | Six |
| Diameter | 1.067 m 3.5 ft |
| Height control | Hydraulic |
| Speed control | Hydraulic |
| Operating speeds | 6-44 rpm |
| Reel drive system pressure | 14,000 (+/- 1,000) kPa 2,000 (+/- 150) psi |
| Reel fore/aft stroke | 359 mm 14.1 in. |
| Cutting width | 9.14 m 30 ft |
| Gathering width | 9.17 m 30.1 ft |
| Overall width | 9.6 m 31.7 ft |
| Approximate weight | 2,559 kg 5,641 lb |
