| Working widths | 19 row: 14.5 m 47.5 ft Row 25: 19.1 m 62.5 ft |
| Number of rows | 19, 25 |
| Row spacing | 762 mm 30 in. |
| Transport width | 19 row: 6 m (19 ft, 8 in.) 25 row: 5.5 m (18 ft, 2 in.) |
| Transport height | 19 row: 4.3 m (14 ft, 1 in.) 25 row: 4.3 m (14 ft, 1 in.) |
| Overall length | 9.75 m 32 ft |
| Centerframe width | 19 row: 3.66 m 12 ft 25 row: 4.57 m 15 ft |
| Fold type | Five-section fold |
| Machine weight - conventional | 19 row: 11,939 kg 26,320 lb 25 row: 13,608 kg 30,000 lb |
| Machine weight - chisel | 19 row: 10,003 kg 22,052 lb 25 row: 11,060 kg 24,384 lb |
| Working widths | 19 row: 14.5 m 47.5 ft Row 25: 19.1 m 62.5 ft |
| Transport width | 19 row: 6 m (19 ft, 8 in.) 25 row: 5.5 m (18 ft, 2 in.) |
| Transport height | 19 row: 4.3 m (14 ft, 1 in.) 25 row: 4.3 m (14 ft, 1 in.) |
| Overall length | 9.75 m 32 ft |
| Centerframe width | 19 row: 3.66 m 12 ft 25 row: 4.57 m 15 ft |
| Number of rows | 19, 25 |
| Row spacing | 762 mm 30 in. |
| Fold type | Five-section fold |
| Machine weight | conventional 19 row: 11,939 kg 26,320 lb 25 row: 13,608 kg 30,000 lb chisel 19 row: 10,003 kg 22,052 lb 25 row: 11,060 kg 24,384 lb |
| Fore-and-aft clearance | 3.4 m 134 in. |
| Underframe clearance | Fully raised: 1100 mm 44 in. |
| Blade diameter | 560 x 4.5 mm 22 x 0.177 in. |
| Blade spacing | 762 mm 30 in. |
| Coulter down force | 2669 N 600 lbf |
| Standard options | Conventional knife options with coulters and closing disks Conventional or mole knife Tru-Depth™ conventional |
| Number of standards | 19, 25 |
| Standard spacing | 762 mm 30 in. |
| Standard Operating depth range | 76 to 305 mm 3 to 12 in. |
| Standard trip force | 5560 N 1250 lbf |
| Standard trip height | 280 mm 11 in. |
| Blade type | Concave notched |
| Disk blade diameter | 460 x 3 mm 18 x 0.118 in. |
| Mounting | Independently mounted arms with pin adjustment |
| Side to side adjustment range | 220 to 460 mm 8.8 to 17 in. |
| Trip height | 465 mm 19.5 in. |
| Max down pressure | 222 N 50 lbf |
| Depth control system | TruSet depth control system or single-point depth control system |
| Hitch system | Pull type: Floating hitch rigid T-hitch - 6 x 12 in. 152 x 305 mm |
| Frame flex | 10 degrees up / 15 degrees down |
| Hitch link | Category 4 or 5 |
| Rear hitch | Fore/aft and side-to-side adjustable drawbar |
| Rear hitch maximum gross vehicle weight (GVW) | 11,300 kg 25,000 lb |
| Wheel mounting | Castering front with walk-over tandem rear |
| Tire configuration | 19 row: Mainframe tires: 320/70R15 145D (six) Inner wing tires: 320/70R15 145D (two) 280/70R15 134D (four) Outer wing tires: 280/70R15 134D (six) 25 row: Mainframe tires: 320/70R15 145D (six) Inner wing tires: 320/70R15 145D (six) Outer wing tires: 500/40R16 153A8/B (two) |
| Engine horsepower requirement | 19 row: 268.5 to 387.8 kW 360 to 520 hp 25 row: 372.8 to 462.3 kW 500 to 620 hp |
| Operating speed | 8 to 16 km/h 5 to 10 mph |
| Selective control valves (SCVs) required | Two |
