| Compatibilit� | W110 and W150 Windrowers |
| Barre de coupe - Entra�nement | Timed dual knife |
| Barre de coupe - R�gime | Variable, 1450 - 1900 spm |
| Couteau (chrome) | Over-serrated, 9 serrations per inch or 14 serrations per inch available |
| Vis sans fin - Diam�tre | 508, single auger mm 20, single auger in. |
| Rouleaux-conditionneurs en acier � angle - Type | Intermeshing steel rolls |
| Largeur de coupe du tablier | 4.95 m 16, 3 ft, in. |
| Largeur hors tout du tablier | 5.41 m 17, 9 ft, in. |
| Poids du tablier | 2656 kg 5850 lb |
| Largeur des andains (selon les conditions de r�colte) | 915 - 2540 mm 36 - 100 in. |
| Compatibilit� | W110 and W150 Windrowers |
| Formation | Adjustable swathboard (plus adjustable forming shields on windrower) |
| Entra�nement | Timed dual knife |
| R�gime | Variable, 1450 - 1900 spm |
| Doigts | Two-tine, double heat treated forged pointed guards, Non-clog guards optional |
| Couteau (chrome) | Over-serrated, 9 serrations per inch or 14 serrations per inch available |
| R�glable | Up and down, fore and aft |
| Barres � dents | Six sectioned with regreasable bearings and six reel bats w/ end caps, 7th bat available for dealer inst. |
| Vitesse variable | 51-85 rpm |
| Diam�tre | 1080 mm 44 in. |
| Entra�nement | Hydraulic |
| Diam�tre | 508, single auger mm 20, single auger in. |
| Entra�nement | Hydraulic direct -drive |
| R�gime | 230 - 320, variable hydraulic rpm |
| Type | Intermeshing steel rolls |
| Diam�tre | 233 mm 9.17 in. |
| R�gime | 601 - 790, variable hydraulic rpm |
| Longueur | 2590 mm 102 in. |
| Entra�nement | Hydraulic motor to enclosed gearbox |
| Largeur de coupe du tablier | 4.95 m 16, 3 ft, in. |
| Largeur hors tout du tablier | 5.41 m 17, 9 ft, in. |
| Poids du tablier | 2656 kg 5850 lb |
| Largeur des andains (selon les conditions de r�colte) | 915 - 2540 mm 36 - 100 in. |
